The FreeNAS® operating system is installed to at least one device that is separate from the storage disks. The device can be a USB stick, SSD, compact flash, or DOM (Disk on Module). Installation to a hard drive is discouraged as that drive is then not available for data storage.
To write the installation file to a USB stick, two USB ports are needed, each with an inserted USB device. One USB stick contains the installer. The other USB stick is the destination for the FreeNAS® installation. Take care to select the correct USB device for the FreeNAS® installation. It is not possible to install FreeNAS® onto the same USB stick containing the installer. After installation, remove the installer USB stick. It might also be necessary to adjust the BIOS configuration to boot from the new FreeNAS® USB stick.
When determining the type and size of the target device where FreeNAS® will be installed, keep these points in mind:
При помощи функции "row()" мы можем создавать записи - данные с типом record. -- Создаём…
-- массив JSONB с объектами select '[{"id":1, "q":true}, {"id":2, "q":false}, {"id":3, "q":true}, {"id":4, "q":false}]'::jsonb; --…
Функция "trim_scale()" умеет отбрасывать лишние нули в числах с типом numeric. select trim_scale(37.000000000); -- 37…
Следующий день относительно текущего т. е. "завтра" var tomorrow = new Date(); tomorrow.setDate(tomorrow.getDate() + 1);…
У нас есть столбец из JSONB объектов. Нам нужно соединить все объекты этого столбца в…
Не всегда нужно группировать записи таблиц в рамках какого-то повторяющегося значения столбца. Иногда нужно просто…